View physical subnet details

This topic describes how to view physical subnet details in the KubeSphere Virtualization (KSV) web console.

Prerequisites

The user that you use has been granted the permissions to use the Physical Resources module. The Physical Resources module is available only to user admin.

Procedure

1. Log in to the KSV web console.

2. In the top navigation bar, click Physical Resources to go to the management page of physical resources.

3. In the left-side navigation pane, choose Networks > Subnets to go to the management page of physical subnets.

4. On the Subnets page, click the name of the physical subnet that you want to view. The details page of the physical subnet appears.

5. On the left side of the details page, view basic information about the physical subnet.

   Parameter	Description
   ID	The universally unique identifier (UUID) of the physical subnet in the system. The UUID is automatically assigned by the system.
   Status	The status of the physical subnet.
   Physical Network	The physical network in which the subnet is created.
   VLAN ID	The VLAN ID that corresponds to the physical subnet.
   IP Range	The IP address range in which the physical subnet resides.
   Gateway Address	The gateway address of the physical subnet.
   DNS Server	The Domain Name System (DNS) server address that corresponds to the physical subnet.
   Bandwidth	The maximum bandwidth of the physical subnet.
   Available IPs	The number of IP addresses available in the physical subnet.
   Used IPs	The number of IP addresses used in the physical subnet.
   Logical Gateway	Specifies whether the logical gateway is enabled.
   Excluded IPs	The IP address or IP address range that is excluded from the physical subnet.
   Created at	The time when the physical subnet was created.
   Created by	The username that is used to create the physical subnet.

6. On the right side of the page, view resources that are associated with the physical subnet. The following table describes the parameters.

   Parameter	Description
   Name	The name of the associated resource.
   ID	The UUID of the associated resource in the system. The UUID is automatically assigned by the system.
   Status	The status of the associated resource.
   IP Range	The IP address range in which the associated resource resides.