View physical subnets

This topic describes how to view physical subnets in the KubeSphere Virtualization (KSV) web console.

Prerequisites

The user that you use has been granted the permissions to use the Physical Resources module. The Physical Resources module is available only to user admin.

Procedure

1. Log in to the KSV web console.

2. In the top navigation bar, click Physical Resources to go to the management page of physical resources.

3. In the left-side navigation pane, choose Networks > Subnets to go to the management page of physical subnets.

   You can view all the physical subnets in the system. The following table describes the parameters.

   Parameter	Description
   Name	The name of the physical subnet. The name can contain only letters, digits, and hyphens (-), and must start and end with a letter or a digit. The name can be up to 16 characters in length.
   ID	The universally unique identifier (UUID) of the physical subnet in the system. The UUID is automatically assigned by the system.
   Status	The status of the physical subnet.
   VLAN ID	The VLAN ID that corresponds to the physical subnet.
   Physical Network	The physical network in which the subnet is created.
   IP Range	The IP address range in which the physical subnet resides.
   Gateway	The gateway address of the physical subnet.
   Available IPs	The number of IP addresses available in the physical subnet.
   Used IPs	The number of IP addresses used in the physical subnet.

4. (Optional) Click the search box above the physical subnet list and set query conditions to search for physical subnets by name or ID. For example, use Name:ab to search for physical subnets whose name contains the string ab.

5. (Optional) In the upper-right corner of the page, click to refresh data.